Measure how much stored grain remains usable after drying, handling, spoilage, and cleaning losses. This storage conversion ratio shows the usable feed or saleable grain recovered from each unit placed into storage.
The main result converts the entered operating assumptions into a consistent planning measure. Review the supporting results before making a purchasing, scheduling, storage, or field decision.
Planning estimate only. Actual agricultural results depend on crop condition, weather, calibration, handling, and local requirements.
Starting with 100 tons and sequential losses of 5%, 1.5%, and 2%, usable grain is 91.70 tons and the storage conversion ratio is 91.70%.
Inputs that multiply the total directly have a proportional effect, while percentage losses or efficiency assumptions change the usable result. Test realistic low and high scenarios.
Use the units shown beside each field. You may convert the final result afterward, but do not mix mass, volume, area, or currency units inside one calculation.
Use expected values for planning and actual measured records for review. Keeping both results makes forecast error visible.
Sampling, moisture, equipment calibration, weather, product variation, and unrecorded losses can all create differences.
No. It performs the stated arithmetic only. Follow agronomic advice, equipment manuals, product labels, and applicable local rules.
| Input | Unit | Purpose |
|---|---|---|
| Grain placed in storage | tons | Use one consistent mass unit. |
| Drying and moisture loss | % | Expected mass reduction from drying. |
| Handling and cleaning loss | % | Applied after drying. |
| Spoilage loss | % | Applied after prior losses. |