Forecast harvest weight and saleable yield from an aquaponic grow area, planting density, crop cycle, and expected losses. Use the result to plan harvest volume, compare production assumptions, and estimate how much growing area is actively contributing during the selected period.
Percent inputs are divided by 100 in the calculation. Unit conversions are shown in the results where applicable.
The forecast is a planning estimate of saleable crop weight for the chosen period, not a guarantee. Actual output depends on crop variety, water quality, stocking balance, disease, and harvest timing.
Keep the forecast period consistent with the number of crop cycles entered. Fish production is not included.
With 500 sq ft, 2.5 plants per sq ft, 0.45 lb per plant, 6 cycles, and 8% loss, gross potential is 3,375 lb and forecast saleable yield is 3,105 lb.
Yes, as a scenario estimate. Replace the defaults with measured operating data and keep a separate contingency for variability.
Calculate shorter periods with consistent assumptions, then add the period results. This is more reliable than using one blended value.
Use the most likely measured value for the base case, then recalculate with conservative and optimistic assumptions to see the planning range.
Equipment performance, biological variation, environmental conditions, measurement error, and downtime can all move the actual result.
No. The calculation runs in your browser and this page does not need to send the entered values to a server.
| Input | Unit | Purpose |
|---|---|---|
| Active grow area | sq ft | Used in the aquaponic system yield forecast estimate |
| Plants per sq ft | plants | Used in the aquaponic system yield forecast estimate |
| Harvest weight per plant | lb | Used in the aquaponic system yield forecast estimate |
| Crop cycles in forecast period | cycles | Used in the aquaponic system yield forecast estimate |
| Expected crop loss | % | Used in the aquaponic system yield forecast estimate |